fire suppression systems use waterless agents to extinguish a fire quickly and with minimal damage to the assets, equipment, or machines within a room. in the past, halon was the chemical of choice for these fire suppression systems, and while it works well, it’s also been discovered that the chemical is dangerous to the environment and ozone. for new installation, you will need to install an alternative to a halon system—including our preferred system, fm-200 fire suppression system. the fire suppression industry has worked to quickly produce a number of more environmentally friendly agents that are less harmful to the ozone layer and less likely to cause damage based on instability and likelihood of injury to individuals. such areas of your building could include: other positives of installing an fm-200 fire suppression system is that it doesn’t leave a residue once the fire is suppressed—meaning little to no cleanup is necessary after a discharge.
most consultants agree that the best of these halon system alternatives is the fm-200 system, manufactured by several different companies. one major concern of replacing halon fire suppression systems is that the systems cannot be infused with the new agents. should you decide to have your fire suppression system replaced because it is still employing halon, you should consult an experienced fire protection company well-versed in the use of fire suppression systems in commercial environments. with our licensed fire protection technicians, you’ll get the advice you need in choosing your new system and the clean agent that is right for your application, as well as guaranteed safe and careful removal of the existing system. however, take the time to research your options, and don’t rush into anything without consulting experts in the fire suppression industry.
it is recommended that halon continue to be used until a permanent replacement is approved by the faa and accepted by the rest of the aviation community. the you do not legally need to remove or replace your halon fire suppression system, and there is no set date where this would be required. there are several good alternatives to halon-based systems on the market today, which include 3m™ novec™ 1230 fire protection fluid – the first, halon fire suppression system cost, halon fire suppression system cost, halon fire extinguisher banned, halon gas death, halon fire extinguisher class.
two of the most popular halon alternatives are 3mu2122 novecu2122 1230 and fm-200u2122. these clean agents have similar benefits of halon, including being able to be used in occupied spaces and not leaving a residue, so they are safe for equipment and minimize any downtime from a lengthy cleanup. halon systems are in the process of being decommissioned. while currently installed halon systems do not need to be replaced, professional fire it’s true that properly maintained systems could be grandfathered and remain in use. some are still in use today, but, like any mechanical extinguishers using other agents are nearly 50 percent larger and two and a half times heavier than halon 1211 extinguishers. the size and weight of 2-, halon 1301 fire extinguisher, halon gas, halon 1211, halon gas effect on human.
When you try to get related information on halon fire suppression system replacement, you may look for related areas. halon fire extinguisher for sale,class d fire extinguisher halon fire suppression system cost, halon fire extinguisher banned, halon gas death, halon fire extinguisher class, halon 1301 fire extinguisher, halon gas, halon 1211, halon gas effect on human.